Product Description
Application Range of Pipe Clamps
The light-duty series of pipe clamps are applied to ordinary mechanical pressure pipes of six size series, with the outer diameter of the pipes ranging from 6 to 102 mm.
The duplex series of pipe clamps are used for mechanical pressure pipes of five size series, with the outer diameter of the pipes ranging from 6 to 42 mm.
The heavy-duty series of pipe clamps are suitable for high mechanical pressure pipes of ten size series, with the outer diameter of the pipes ranging from 6 to 406 mm.
Material Characteristics of Pipe Clamps
Density, bending strength, impact toughness, compressive strength, modulus of elasticity, tensile strength, temperature resistance, color
Installation Procedure of Pipe Clamps
Assembly on the Welding Plate: Before assembly, in order to better determine the direction of the clamp, it is recommended to mark the fixing position first, then weld the joint, insert the lower half of the pipe clamp body, place the pipe to be fixed, then place the other half of the pipe clamp body and the cover plate, and tighten them with screws. It is strictly prohibited to directly weld the bottom plate with the installed pipe clamp.
Assembly on the Ground Guide Rail: The guide rail can be welded onto the foundation or fixed with screws. Subsequently, push the guide rail nut into the rail and turn it 90 degrees, insert the lower half of the pipe clamp body into the nut, place the pipe to be fixed, then place the upper half of the pipe clamp body and the cover plate, and fix them with screws.
Stacked Assembly: The guide rail can be welded onto the foundation or fixed with screws. First, install the lower half of the pipe clamp body, place the pipe to be fixed, then place the upper half of the pipe clamp body, and fix them with screws. Prevent it from rotating by using the anti-loosening cover plate. Then install the second pipe clamp in the same way.
Assembly of Bent Pipes: When assembling bent pipes, the pipe clamps should be use
Audited Supplier 
){kind=link}